Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 28.06.2025 10:32

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Is it just me, or do we all hate Sasuke from Naruto?

[image of Common-mode choke]

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Controversial BTS opinions?

(Dc diagram shown, AC is similar).

The MOV will conduct when the voltage exceeds 50% of line voltage.

eight

Trump speech prompts concerns about politicization of military - NBC News

I post the exact comment here.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

It seems Mohan does not understand the difference between a comment and an Answer.

Sunnova Announces Strategic Action to Facilitate Value-Maximizing Sale Process - Business Wire

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

2024–10–10[John johnson John Johnson ]

These are simplified answers to the original question, and does not change anything I wrote above.

Midea is recalling its U-shaped air conditioners because of potential mold growth - The Verge

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Here is a simplified AC power diagram.

But it can get overloaded, and no longer works.

New study finds strong link between hearing loss and dementia - WKRC

Because the load is inductive, the current lags the voltage.(by a bit).

Edit 2024–10.

nine

Samsung is struggling to sell the Galaxy S25 Edge - SamMobile

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

Kidney disease: 5 symptoms women should be careful about - Times of India

So, the voltage could go up to 500 volts, and the fuse will not open up.

For this case there are devices called Metal oxide varistors (MOV).

At one ohm, the resistor has a maximum of 1 watt power.

Emmy nominations voting ends tonight. Here's what our critic hopes will make the cut - NPR

In schematic diagrams this is the symbol for a fuse:

This one hit behind the barn.

a photo is worth a thousand words.

Is Farage right to blame the housing crisis in the UK on migration?

What does a fuse do?

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Scientists uncover kidney-to-brain route for Parkinson’s-related protein spread - PsyPost

The third is lightning and “how it gets conducted into a home.”

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

He then describes the function of a fuse.

Food and fitness make or break success on weight loss meds, report finds - ABC News

[old diagram got deleted by accident]

but this device (an Inductor) … impedes the rapid changes in the current.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

One

but I think this circuit , shows a few more pieces.

An AC voltage/ current source, and an ac inductive load.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Upvotes:

What is lightning?

At least they know the answer if they wanted it.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

A fuse is a non-resetable over current circuit protector.

There are two important concepts here.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

This is where this question deviates from being a 'generic' question, and becomes more specific.

This is where the MOV conducts again, and dissipated the energy.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

Now when you have a certain ac resistance, then a current flows in a loop.

It also is a device that limits the change in current flow.

He then asserts :

Can the fuse protect the electronic devices from lightning instead of a surge protector.

A circuit breaker is similar, but is resettable.

This device then solves the entire problem.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

This is 'the assistant's answer'

First Sentence:

The bolt then partially travels down the line to your home.

These devices are installed between the “hot” and “neutral” and protective ground.

Barnstars:

2024–10–16 [ OO OLAOYE OYEBODE ]

2024–10–14 [Omar Gharbi Omar Gharbi ]

There are three different concepts here that are getting confused.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

what exactly is a ‘surge’ protector?

so, what happens?

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

But… the neutral is now “floating” because of the 1 ohm resistance.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

One is “what exactly is in a ‘surge protector’ ? ”

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

He then describes Rainy Season and Lightning.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

the problem then depends on "how fast does the fuse operate?".

The other is “what does a “fuse” do?”